6.6-dm_filter

DM_FILTER


ERROR: [DM_FILTER_E_DUMPOUT_TYPE]

SEVERITY: ERROR

DESCRIPTION: S Error writing type description for %s to the dump output file.

CAUSE: The filter program received an error on an attempt to write out a type description to the output dumpfile.

ACTION: Check previous error messages for further information. Check consistency of type in the dump input file.

PARAMS: 1%s – the name of the type on which the error occurred.

 

ERROR: [DM_FILTER_E_USER_ARG]

SEVERITY: ERROR

DESCRIPTION: SS Argument Error: the user specified in the %s argument does not exist. User name: .

CAUSE: A replication request gives a new user to own documents. The filter program verifies that the specified user exists. This verification failed.

ACTION: Correct the command line arguments.

PARAMS: 1%s – the flag name for the new user 2%s – the specified user name

 

ERROR: [DM_FILTER_E_SYNTAX_NEWVALUE]

SEVERITY: ERROR

DESCRIPTION: S Error in argument syntax for -new_value flag. Parameter value %s is incorrect. The correct format is -new_value type.attribute value.

CAUSE: The argument given to a -new_value option was not of the correct format. The format required is: type_name.attribute_name attribute_value

ACTION: Fix command options.

PARAMS: 1%s – the callers parameter value

 

ERROR: [DM_FILTER_E_NO_DUMP_INPUT]

SEVERITY: ERROR

DESCRIPTION: SS Cannot locate dump input file: %s. Operating System Status %s.

CAUSE: The filter program could not find the dump input file.

ACTION: Make sure the specified dump input file exists. Check permissions of the filter program (which normally runs as the docbase owner) to access the specified input file.

PARAMS: 1%s – the dump input file 2%s – the os error status

 

ERROR: [DM_FILTER_E_FOLDER_ARG]

SEVERITY: ERROR

DESCRIPTION: SS Argument Error: the folder specified in the %s argument does not exist. Folder name: .

CAUSE: A replication request gives a new folder in which to place documents. The filter program verifies that the specified folder exists. This verification failed.

ACTION: Correct the command line arguments.

PARAMS: 1%s – the flag name for the new folder 2%s – the specified folder name

 

ERROR: [DM_FILTER_E_TYPE_UNKNOWN]

SEVERITY: ERROR

DESCRIPTION: SS An internal error was detected in the filter program. An attribute contained an unknown or unsupported type. Attribute: %s.%s

CAUSE: During processing in the filter, an attribute which was to be replaced was found to be of an unknown type.

ACTION: Check for previous error messages and report to Documentum support.

PARAMS: 1%s – the name of the type. 2%s – the name of the attribute.

 

ERROR: [DM_FILTER_E_DUMPIN_INIT]

SEVERITY: ERROR

DESCRIPTION: S Error opening/initializing dump input file: %s.

CAUSE: The filter program was returned an error from the dumpfile open call.

ACTION: Check previous error messages for further information.

PARAMS: 1%s – the dump input file

 

ERROR: [DM_FILTER_E_STORAGE_ARG]

SEVERITY: ERROR

DESCRIPTION: SS Argument Error: the storage area specified in the %s argument does not exist. Storage Area name: .

CAUSE: A replication request gives a new storage area to place documents. The filter program verifies that the specified area exists. This verification failed.

ACTION: Correct the command line arguments.

PARAMS: 1%s – the flag name for the new storage area 2%s – the specified storage area name

 

ERROR: [DM_FILTER_E_SYNTAX_NOOPT]

SEVERITY: ERROR

DESCRIPTION: S The required parameter %s was not specified.

CAUSE: A required input parameter was not given to the filter program. This could be a parameter required for all filter actions or the parameter could be needed because of other command line options which were specified.

ACTION: Fix command options.

PARAMS: 1%s – the name of the option.

 

ERROR: [DM_FILTER_E_DUMPOUT_EXISTS]

SEVERITY: ERROR

DESCRIPTION: SS Cannot remove existing dump output file: %s. Operating System Status %s.

CAUSE: The filter program found that the specified dump output file already existed. It tried to remove the existing file but could not.

ACTION: Remove the existing dump output file.

PARAMS: 1%s – the dump output file 2%s – the os error status

 

ERROR: [DM_FILTER_E_OBJECT_FILTER]

SEVERITY: ERROR

DESCRIPTION: SS Error processing object %s (type %s) in filter program.

CAUSE: An error was encountered while applying the filter actions to an object of the dumpfile. The object could not be altered correctly.

ACTION: Check previous error messages for further information.

PARAMS: 1%s – the id of the object on which the error occurred. 2%s – the typename of the object

 

ERROR: [DM_FILTER_E_STORE_NOT_INDEXABLE]

SEVERITY: ERROR

DESCRIPTION: Warning: the storage area specified has no fulltext index defined on it, but the filter arguments do not disable fulltext indexing. Objects filtered will have their fulltext index attributes set to False.

CAUSE: Since the storage area being loaded to does not have a fulltext index defined on it, the loaded objects must be marked non indexable.

ACTION: Create a fulltext index on the storage area if desired

PARAMS: none

 

ERROR: [DM_FILTER_E_ACL_ARG]

SEVERITY: ERROR

DESCRIPTION: SSS Argument Error: the acl specified in the %s argument does not exist. Acl name: .

CAUSE: A replication request gives a new acl setting to documents. The filter program verifies that the specified acl exists. This verification failed.

ACTION: Correct the command line arguments.

PARAMS: 1%s – the flag name for the new acl 2%s – the specified acl domain name 3%s – the specified acl name

 

ERROR: [DM_FILTER_E_DUMPOUT_OBJECT]

SEVERITY: ERROR

DESCRIPTION: SS Error writing description for object %s (type %s) to the dump output file.

CAUSE: The filter program received an error on an attempt to write out an object description to the output dumpfile.

ACTION: Check previous error messages for further information.

PARAMS: 1%s – the id of the object on which the error occurred. 2%s – the typename of the object

 

ERROR: [DM_FILTER_E_DUMMY1_MESSAGE]

SEVERITY: ERROR

DESCRIPTION: This is here to keep the error numbers from shifting.

CAUSE: This is a dummy message that is never used. Do not ever remove it.

ACTION:

PARAMS:

 

ERROR: [DM_FILTER_E_ARG_MISSING]

SEVERITY: ERROR

DESCRIPTION: S Argument Error: missing required argument %s.

CAUSE: An argument that is required for the filter program was not specified. An argument may be required for all calls (such as the dump file name) or the argument may be required due to the presence of one of the other specified arguments.

ACTION: Correct the command line arguments.

PARAMS: 1%s – the missing argument

 

ERROR: [DM_FILTER_E_API_ERROR0]

SEVERITY: ERROR

DESCRIPTION: S An error was returned from an API call in an attempt to execute the command: .

CAUSE: An API call that was made to lookup docbase information to use in the filter program returned with an error indication.

ACTION: Check the status of the specified docbase to ensure it is active. Check any previously reported error messages for clues to the problem.

PARAMS: 1%s – the command string

 

ERROR: [DM_FILTER_E_API_ERROR]

SEVERITY: ERROR

DESCRIPTION: SS An error was returned from an API call in an attempt to execute the command: . The error reason was: .

CAUSE: An API call that was made to lookup docbase information to use in the filter program returned with an error indication.

ACTION: Check the status of the specified docbase to ensure it is active. Check any previously reported error messages for clues to the problem.

PARAMS: 1%s – the command string 2%s – the error message returned by getmessage

 

ERROR: [DM_FILTER_E_DUMPIN_HEADER]

SEVERITY: ERROR

DESCRIPTION: S Error reading header information in the dump input file: %s. Cannot build list of type version stamps.

CAUSE: The filter program received an error from the dump routines process the dumpfile header information.

ACTION: Check previous error messages for further information. Check the dumpfile version/date for compatibility with the current system.

PARAMS: 1%s – the dump input file

 

ERROR: [DM_FILTER_E_SYNTAX_ARGCOUNT]

SEVERITY: ERROR

DESCRIPTION: S Insufficient number of arguments for parameter %s.

CAUSE: The command line string did not contain enough arguments to fulfill the given flag.

ACTION: Fix command options.

PARAMS: 1%s – the name of the option.

 

ERROR: [DM_FILTER_E_DUMPOUT_INIT]

SEVERITY: ERROR

DESCRIPTION: S Error opening/initializing the dump output file: %s.

CAUSE: The filter program was returned an error from the dumpfile open call.

ACTION: Check previous error messages for further information. Check permissions to create the specified file. Check that the specified directory exists and is accessible. Check for available diskspace.

PARAMS: 1%s – the dump output file

 

ERROR: [DM_FILTER_E_STATE_ERROR]

SEVERITY: ERROR

DESCRIPTION: An internal error was detected in the filter program. The program arguments were not correctly processed.

CAUSE: The program state built from the arguments is not consistent.

ACTION: Check for previous error messages and report to Documentum support.

PARAMS:

 

ERROR: [DM_FILTER_E_SYNTAX_BADPARM]

SEVERITY: ERROR

DESCRIPTION: S The parameter %s is not a valid filter option.

CAUSE: An unrecognized option was given to the filter program.

ACTION: Fix command options.

PARAMS: 1%s – the name of the option.

 

ERROR: [DM_FILTER_E_BOOLEAN_VAL]

SEVERITY: ERROR

DESCRIPTION: SS Argument Error: the value (%s) for argument (%s) is not a legal boolean value. The value must be T(rue) or F(alse)

CAUSE: A value was given to a boolean flag that did not begin with T or F (case is important).

ACTION: Correct the command line arguments.

PARAMS: 1%s – the specified boolean value 2%s – the argument flag name

 

ERROR: [DM_FILTER_E_DUMPOUT_CONTENT]

SEVERITY: ERROR

DESCRIPTION: SS Error writing content data for object %s (type %s) to the dump output file.

CAUSE: The filter program received an error on an attempt to write out the content data for an object to the output dumpfile. When an object with content data is encountered during filter processing, the program just reads the content data from the input file and writes in out to the output file. This error could indicate a problem reading the input or in writing the output.

ACTION: Check previous error messages for further information.

PARAMS: 1%s – the id of the object on which the error occurred. 2%s – the typename of the object

 

ERROR: [DM_FILTER_I_STARTUP]

SEVERITY: INFORMATION

DESCRIPTION: SSS Starting program %s on dumpfile %s. Output to %s.

CAUSE: Trace message given at filter startup. Trace level 1.

ACTION:

PARAMS: 1%s – the program name (dmrepfilter) 2%s – the dump input file 3%s – the dump output file

 

ERROR: [DM_FILTER_I_COMPLETE]

SEVERITY: INFORMATION

DESCRIPTION: IIII Program completed with status %d.\n %d objects processed from input file.\n %d objects written to output file.\n %d types written to output file.

CAUSE: Trace message given at filter exit. Trace level 1.

ACTION:

PARAMS: 1%d – the program exit status 2%d – the number of objects in the dump input file 3%d – the number of objects written to the dump output file 4%d – the number of types written to the dump output file

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: