7.0-dm_policy

DM_POLICY


ERROR: [DM_POLICY_F_INIT3]

SEVERITY: FATAL
DESCRIPTION: The type manager returned an error storing the dm_policy type.
CAUSE: Unknown.
ACTION: Look at the error message logged by the type manager. Report this message and any parameters to your Documentum site representative.
PARAMS:

ERROR: [DM_POLICY_F_INIT2]

SEVERITY: FATAL
DESCRIPTION: II Version stamp %d was expected to be %d.
CAUSE: The version stamp that the dm_policy object software expected was different from the actual version stamp in the database.
ACTION: You must upgrade your DocuServer database to conform to the software that you are running. If your software and data are consistent, then report this message and any parameters to your Documentum Site Representative.
PARAMS:

ERROR: [DM_POLICY_F_INT1]

SEVERITY: FATAL
DESCRIPTION: S The following database query %s could not be executed.
CAUSE: Inconsistency between the server and the type.
ACTION: Look at the error logged by the database. Report this message and any parameters to your Documentum Site Representative.
PARAMS:

ERROR: [DM_POLICY_F_TYPE_INIT]

SEVERITY: FATAL
DESCRIPTION: S Failed to initialize type %s.
CAUSE: Unknown.
ACTION: Report this message and any parameters to your Documentum site representative.
PARAMS:

ERROR: [DM_POLICY_F_AS_INIT2]

SEVERITY: FATAL
DESCRIPTION: II Version stamp %d was expected to be %d.
CAUSE: The version stamp that the dm_alias_set object software expected was different from the actual version stamp in the database.
ACTION: You must upgrade your DocuServer database to conform to the software that you are running. If your software and data are consistent, then report this message and any parameters to your Documentum Site Representive.
PARAMS:

ERROR: [DM_POLICY_F_INIT1]

SEVERITY: FATAL
DESCRIPTION: The dm_policy type was found in the database without a version stamp.
CAUSE: Unknown.
ACTION: Report this message and any parameters to your Documentum Site Representative.
PARAMS:

ERROR: [DM_POLICY_F_AS_INIT1]

SEVERITY: FATAL
DESCRIPTION: The dm_alias_set type was found in the database without a version stamp.
CAUSE: Unknown.
ACTION: Report this message and any parameters to your Documentum Site Representive.
PARAMS:

ERROR: [DM_POLICY_F_AS_INIT3]

SEVERITY: FATAL
DESCRIPTION: The type manager returned an error storing the dm_alias_set type.
CAUSE: Unknown.
ACTION: Look at the error logged by the type manager. Report this message and any parameters to your Documentum Site Representative.
PARAMS:

ERROR: [DM_POLICY_F_TYPE_CONVERSION]

SEVERITY: FATAL
DESCRIPTION: I Failed to convert type dm_policy to version %d.
CAUSE: Type conversion failed.
ACTION: Report this message and any parameters to your Documentum Site Representative.
PARAMS: The first parameter is the version stamp we are trying to upgrade to.

ERROR: [DM_POLICY_F_TYPE_CONVERSION_QUERY_FAILURE]

SEVERITY: FATAL
DESCRIPTION: SI The following database error occurred:%s. Attempt to upgrade dm_policy type to version %d failed.
CAUSE: A query failed during an attempt to upgrade dm_policy.
ACTION: Report this message along with the error from the database to your Documentum Site Representative.
PARAMS: The first parameter is the database error. The second parameter is the dm_policy version stamp we were trying to upgrade to. $Id: dmpom.e,v 5.4 2001/01/23 20:28:18 xtang Exp $ dmObjectManager class errors

ERROR: [DM_POLICY_E_AS_ALIAS_NAME_NOT_UNIQUE]

SEVERITY: ERROR
DESCRIPTION: SSII The alias name %s in alias set %s is defined at positions %d and %d.
CAUSE: Tried to create an alias that already exists in the same alias set.
ACTION: Try again with a different alias name.
PARAMS:

ERROR: [DM_POLICY_E_AS_EMPTY_NAME]

SEVERITY: ERROR
DESCRIPTION: The alias set has no name.
CAUSE: You have provided an alias set without a name.
ACTION: Supply a name for the alias set.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1013]

SEVERITY: ERROR
DESCRIPTION: SS Unable to set the objects ACL to %s. Details:%s
CAUSE: The Internal Action Proc failed to set the objects ACL.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_NO_EXCP_STATE]

SEVERITY: ERROR
DESCRIPTION: DS The dm_policy object identified by %s does not have an exception state defined for state %s.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_AS_EMPTY_ALIAS_NAME]

SEVERITY: ERROR
DESCRIPTION: SI Cannot assign an empty alias name to alias set %s at position %d.
CAUSE: You have provided an empty alias name.
ACTION: Supply a name at the specified position.
PARAMS:

ERROR: [DM_POLICY_E_BAD_STATE_CHAIN]

SEVERITY: ERROR
DESCRIPTION: D The policy object identified by %s has loops.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_INVALID_ALIAS_SET_NAME]

SEVERITY: ERROR
DESCRIPTION: SD Invalid alias set name %s of policy %s specified.
CAUSE: You tried to use an invalid alias set name.
ACTION: Retry with a valid alias set name.
PARAMS:

ERROR: [DM_POLICY_E_CURSOR_FAIL]

SEVERITY: ERROR
DESCRIPTION: SS The following query %s generated the following database %s error
CAUSE: Used for internal purpose.
ACTION: Report to your sys admin.
PARAMS:

ERROR: [DM_POLICY_E_MUST_SAVE]

SEVERITY: ERROR
DESCRIPTION: D Changes to the sysobject (%s) must be saved or reverted first.
CAUSE: This error occured when user is doing promote, demote, attach, suspend, or resume on a new or modified object.
ACTION: User has to save or revert the change before doing any of the action described above.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERPOSTPROC_TYPE]

SEVERITY: ERROR
DESCRIPTION: DSDS The policy identified by %s has an invalid user-defined post-processing object %s:%s specified for state %s.
CAUSE: The object is of wrong type.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1015]

SEVERITY: ERROR
DESCRIPTION: SSS Unable to post a request to render the document in %s format using Autorender for %s. Details:%s
CAUSE: The Internal Action Proc failed to invoke Autorender for creating a new rendition for a document.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1007]

SEVERITY: ERROR
DESCRIPTION: SS Unable to add symbolic label:%s. Details:%s
CAUSE: The Internal Action Proc failed to add symbolic label.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_METHOD_TIMEOUT]

SEVERITY: ERROR
DESCRIPTION: SI The method (%s) timeout before the action procedure could finish. The method timeout is currently set to %d.
CAUSE: This error occured when the action procedure takes longer time to finish. If the time exceeds the method timeout length, this error will occur.
ACTION: Set the timeout_default attribute of the method to a greater value. If timeout_default is set to more than 5 minutes, you may need to set client_session_timeout in server.ini accordingly.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1010]

SEVERITY: ERROR
DESCRIPTION: SS Unable to link object to location:%s. Details:%s
CAUSE: The Internal Action Proc failed to link object to location.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_RESULT_ID]

SEVERITY: ERROR
DESCRIPTION: D The dm_bp_transition returns an invalid ID %s.
CAUSE: Internal error.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_FAILED_CREATE_STATE_EXT_OBJ]

SEVERITY: ERROR
DESCRIPTION: D Failed to create new dm_state_extension object for the document lifecycle (%s).
CAUSE: Problem with dm_relation or dm_state_extension type.
ACTION: Contact Documentum Tech Support.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1005]

SEVERITY: ERROR
DESCRIPTION: SSSS Unable to add value:%s to attribute:%s at position %s. Details:%s
CAUSE: The Internal Action Proc failed to add value to attribute.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERACTION_TYPE]

SEVERITY: ERROR
DESCRIPTION: DSDS The policy identified by %s has an invalid user-defined action object %s:%s specified for state %s.
CAUSE: The object is of wrong type.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_BAD_TYPE_ATTRC]

SEVERITY: ERROR
DESCRIPTION: SSII In policy named %s, count of %s: %d does not match the count of included_type: %d.
CAUSE: Tried to save a policy with inconsistent number of included_type and include_subtypes.
ACTION: NONE.
PARAMS:

ERROR: [DM_POLICY_E_CANT_FIND_PROC_OBJ]

SEVERITY: ERROR
DESCRIPTION: SDS Cant find the %s procedure with id (%s) and version (%s).
CAUSE: No object can be found with the matching version label.
ACTION: Make sure that version has the correct value and id points to the chronicle id.
PARAMS:

ERROR: [DM_POLICY_E_CURSOR_ERROR]

SEVERITY: ERROR
DESCRIPTION: S A database error has occurred during the creation of a cursor (%s).
CAUSE: A SQL statement that queries the Documentum schema has failed. This error message indicates that a failure occurred during the parsing of the generated SQL statement by the underlying RDBMS.
ACTION: The error message from the RDBMS is shown in the message. Use that error message to figure out what has happened.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1002]

SEVERITY: ERROR
DESCRIPTION: SSSS Unable to set attribute:%s to value:%s at position %s. Deatils:%s
CAUSE: The Internal Action Proc failed to set value to attribute.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_RESULT_CONTENT]

SEVERITY: ERROR
DESCRIPTION: DS The dm_bp_transition returns a document (ID=%s) either without content or bad content (%s).
CAUSE: Internal error.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_INVALID_MOVE_POS]

SEVERITY: ERROR
DESCRIPTION: III In movestate API, the old/new position (%d/%d) needs to be positive and less than (or equal to) the number of states (%d).
CAUSE: User has specified either an invalid old position or an invalid new position.
ACTION: Make sure both the old and new positions are in the right range.
PARAMS:

ERROR: [DM_POLICY_E_NO_NORMAL_STATE]

SEVERITY: ERROR
DESCRIPTION: D The policy identified by %s has no normal state. CASUE: A valid policy must have at least one normal state.
CAUSE:
ACTION: Add a normal state to this policy.
PARAMS:

ERROR: [DM_POLICY_E_BAD_RESULT_STATUS]

SEVERITY: ERROR
DESCRIPTION: DS Document %s has no content, but the status is bad (%s).
CAUSE: The dm_bp_transition encounters errors while processing the criteria and actions. However, the error message does not get stored in the content of the result document.
ACTION: Check the $DM_HOME/bin/dm_bp_transition.out for detailed error message.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1001]

SEVERITY: ERROR
DESCRIPTION: SSS Unable to set attribute:%s to value:%s. Details:%s
CAUSE: The Internal Action Proc failed to set value to attribute.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_STATE_NAME]

SEVERITY: ERROR
DESCRIPTION: SD Invalid state name %s of policy %s specified.
CAUSE: You tried to use an invalid state name.
ACTION: Retry with a valid state name.
PARAMS:

ERROR: [DM_POLICY_E_AS_PRIVILEGES_OWNER]

SEVERITY: ERROR
DESCRIPTION: S Cannot change the owner name of the %s alias set.
CAUSE: You must have superuser privilege to change the owner of an alias set.
ACTION: Set your sites superuser about changing the owner of the alias set.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_ATCH_TYPE]

SEVERITY: ERROR
DESCRIPTION: S The attached type %s is not a valid docbase type.
CAUSE: The specified type does not exist in docbase.
ACTION: Make sure the specified type exists in docbase.
PARAMS:

ERROR: [DM_POLICY_E_NO_ATTACH_STATE]

SEVERITY: ERROR
DESCRIPTION: D The policy identified by %s does not have any attachable state.
CAUSE: A valid policy must have at least one attachable state, normal or exception.
ACTION: Add an attachable state to this policy.
PARAMS:

ERROR: [DM_POLICY_E_BAD_RESULT_ERROR_2]

SEVERITY: ERROR
DESCRIPTION: SSSSSS The BP Logfile (%s) has illegal error format ([ErrorCode]=%s,[Parameter]=%s,[Parameter]=%s,[Parameter]=%s,[ServerError]=%s.
CAUSE: Error reported by dm_bp_transition needs to follow the following format: [ErrorCode] [Parameter] [Parameter] [Parameter] [ServerError] The number of parameters may vary depending on the error code. The keywords within the square bracket are case-sensitive. The legal range of is between 1000 and 1015.
ACTION: Make sure the error follow the format.
PARAMS:

ERROR: [DM_POLICY_E_REMOVE_NO_STATE]

SEVERITY: ERROR
DESCRIPTION: D Policy object %s has no state to be removed.
CAUSE: You tried to remove a state from an empty policy object.
ACTION: N/A
PARAMS:

ERROR: [DM_POLICY_E_SET_OVERR_BAD_STATE]

SEVERITY: ERROR
DESCRIPTION: DS You cannot set the type_override attribute because dm_polict %s does not have a state named %s.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_DEFAULT_POLICY_ID]

SEVERITY: ERROR
DESCRIPTION: DS The policy object with id %s is the default_policy_id for type %s. In order to destroy the policy, you must first modify the data dictionary for type and set the default_policy_id to another valid policy object or NULL.
CAUSE: An attempt has been to expunge a policy object even though it is still linked to the specified type as the default_policy_id
ACTION: You must first modify the data dictionary for the specified type and set the default_policy_id to a valid policy object or NULL.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERPOSTPROC]

SEVERITY: ERROR
DESCRIPTION: DDS The policy identified by %s has an invalid user-defined post-processing object id %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_AS_INVALID_ID]

SEVERITY: ERROR
DESCRIPTION: DS Invalid alias set object ID %s found for %s.
CAUSE: Cannot fetch the alias set with the given object id.
ACTION: Try again with the correct id.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_EXCP_NAME]

SEVERITY: ERROR
DESCRIPTION: SDS The state %s defined for dm_policy %s has an invalid exception state %s.
CAUSE: The exception state defined for the normal state does not exist.
ACTION: Add the execption state to the policy object.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERPOSTPROCSERVICE]

SEVERITY: ERROR
DESCRIPTION: DSS The policy identified by %s has an invalid user-defined post-processing service %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1600]

SEVERITY: ERROR
DESCRIPTION: S The User Actions Proc failed. Details:%s
CAUSE: The User Actions Proc failed due to the error described in Details.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_OVERRIDE]

SEVERITY: ERROR
DESCRIPTION: DDS The policy identified by %s has an invalid type_overwide %s specified for state %s.
CAUSE: NONE
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1012]

SEVERITY: ERROR
DESCRIPTION: SS Unable to move object to location:%s. Details:%s
CAUSE: The Internal Action Proc failed to move object to location.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_CANT_DESTROY]

SEVERITY: ERROR
DESCRIPTION: D Cannot destroy policy identified by %s since its state is installed or currently referenced by some sysobject. CASUE: You cannot destroy a policy if the definition state is INSTALLED. You must unistall the policy first. If the definition state is not INSTALLED, but the policy is referenced by some sysobject, you must be superuser and use force_flag = T to detroy this policy.
CAUSE:
ACTION: You may need to unistall the policy and set force_flag to True.
PARAMS:

ERROR: [DM_POLICY_E_BAD_OVERRIDE_TYPE]

SEVERITY: ERROR
DESCRIPTION: DSDS The policy identified by %s has an invalid type_overwide object %s:%s specified for state %s.
CAUSE: NONE
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERACTIONSERVICE]

SEVERITY: ERROR
DESCRIPTION: DSS The policy identified by %s has an invalid user-defined action service %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_OPEN_LOG_FAILURE]

SEVERITY: ERROR
DESCRIPTION: SS Error opening file (%s). Operating System error: (%s).
CAUSE: Attempt to open the named file failed. The operating system error should give a better indication of the actual problem.
ACTION: Check if the indicated file exists check permissions to open or create the file.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1800]

SEVERITY: ERROR
DESCRIPTION: S The Action failed. Details:%s
CAUSE: The System Actions Proc failed due to the error described in Details.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_0001]

SEVERITY: ERROR
DESCRIPTION: S Dmbasic error. Details:%s
CAUSE: There exists some dmbasic error in users script.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_INCONSISTENT_JAVA_DOCBASIC]

SEVERITY: ERROR
DESCRIPTION: DSSS The policy identified by %s cannot define a value for attribute %s for state %s when java_methods is set to %s.
CAUSE: The attribute java_methods is set to F and one of the atttributes user_entry_service, user_action_service, or user_postprocessing_service has a defined value. Or, the attribute java_methods is set T and one of the atttributes user_criteria_id, user_action_id, or user_postproc_id has a defined value.
ACTION: If the policy is using java services, java_methods must be set to T. A policy must use only docbasic procedures or java services but not both.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_ALIAS_SET_INDEX]

SEVERITY: ERROR
DESCRIPTION: SD Invalid alias set index %s of policy %s specified.
CAUSE: You tried to use an invalid alias set index.
ACTION: Retry with a valid alias set index.
PARAMS:

ERROR: [DM_POLICY_E_BAD_STATE_ATTRC]

SEVERITY: ERROR
DESCRIPTION: SSII In policy named %s, count of %s: %d does not match the count of state number: %d.
CAUSE: Tried to save a policy with invalid state attribute count.
ACTION: Most likely the user tried to manipulate state attributes with append or insert or remove methods instead of appendstate, insertstate or removestate
PARAMS:

ERROR: [DM_POLICY_E_FAILED_TICKET]

SEVERITY: ERROR
DESCRIPTION: SSD Failed to generate a ticket for %s to execute %s operation on object %s
CAUSE: A ticket has failed to be generated for executing the user-specified operation on the object.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_NOT_VALIDATED]

SEVERITY: ERROR
DESCRIPTION: D Cannot install a business %s which is not validated.
CAUSE: User tried to install a dm_policy object which has not been validated.
ACTION: Run validate API to validate the object, then re-run install.
PARAMS:

ERROR: [DM_POLICY_E_NEED_PRIMARY_TYPE]

SEVERITY: ERROR
DESCRIPTION: You must set the primary type (i.e. included_type[0]) for this policy object.
CAUSE: Every business policy object must associate with at least a type. The included_type[0] stores the primary type. Other values represents the subtypes of the primary type.
ACTION: set included_type[0] to a valid type name.
PARAMS:

ERROR: [DM_POLICY_E_BAD_ACTION]

SEVERITY: ERROR
DESCRIPTION: DDS The policy identified by %s has an invalid action object id %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_NO_INSTALLED_SAVE]

SEVERITY: ERROR
DESCRIPTION: You cannot save an INSTALLED policy object with changes related to policy definition.
CAUSE: User tried to save one of the following changes to an installed policy object: (1) policy-specific attributes excluding state_description, allow_attach, allow_schedule, and return_to_base, (2) position of a state within the policy, (3) adding new states, and (4) deleting existing states.
ACTION: Uninstall the policy object first.
PARAMS:

ERROR: [DM_POLICY_E_BAD_STATE]

SEVERITY: ERROR
DESCRIPTION: DS The dm_policy object identified by %s does not have a state named %s.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1011]

SEVERITY: ERROR
DESCRIPTION: SS Unable to unlink object from location:%s. Details:%s
CAUSE: The Internal Action Proc failed to unlink object from location.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERENTRY]

SEVERITY: ERROR
DESCRIPTION: DDS The policy identified by %s has an invalid user-defined entry criteria id %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_NO_ROUTER_BP]

SEVERITY: ERROR
DESCRIPTION: S The attached type %s can not be dm_router, dm_policy, or their subtypes.
CAUSE: Types dm_router and dm_policy, and their subtypes are not allowed to be in the included_type.
ACTION: Make sure the specified type is not dm_router, dm_policy, or their subtype.
PARAMS:

ERROR: [DM_POLICY_E_PRIVILEGES]

SEVERITY: ERROR
DESCRIPTION: SS The current user (%s) has insufficient privileges to save or destroy the %s policy object.
CAUSE: A user with insufficient privileges tried to save or destroy an policy object.
ACTION: You must have create type, sysadmin, or superuser privilege to create a policy object. You must be the creator of the policy object, or have superuser privilege to modify or destroy the policy object. See your system administrator if you think you should have create type privilege.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_ATCH_SUBTYPE]

SEVERITY: ERROR
DESCRIPTION: SS The attached type %s is not a subtype of %s.
CAUSE: The specified subtype is not a subtype of the primary type.
ACTION: Only specify subtypes of the primary type in positions greater than zero.
PARAMS:

ERROR: [DM_POLICY_E_BP_OWNER_BATCH_PROMTE]

SEVERITY: ERROR
DESCRIPTION: It is not allowed to specify lifecycle_owner (in a_bpaction_run_as of docbase_config) to run the lifecycle actions.
CAUSE: a_bpaction_run_as of docbase_config is set to lifecycle_owner.
ACTION: Set a_bpaction_run_as to a differnt value.
PARAMS:

ERROR: [DM_POLICY_E_LAUNCH_BAD_STATE]

SEVERITY: ERROR
DESCRIPTION: DS Cannot evaluate the entry_criteria/action of dm_policy %s because the state %s does not exist.
CAUSE: The state name does not exist in the policy.
ACTION: Internal error.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERACTION]

SEVERITY: ERROR
DESCRIPTION: DDS The policy identified by %s has an invalid user-defined action object id %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_BAD_STATE_NAME]

SEVERITY: ERROR
DESCRIPTION: S The specified state name %s either is empty, or does not start with letter, or contains :, ., or ,.
CAUSE: User does not follow the naming convention for a state name.
ACTION: Change the state name so that the following rules are satisfied: (1) It starts with a letter. (2) It does not contain :, ., or ,.
PARAMS:

ERROR: [DM_POLICY_E_GET_OVERR_BAD_STATE]

SEVERITY: ERROR
DESCRIPTION: DS You cannot get the type_override value due to that dm_policy %s does not have a state named %s.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERENTRYSERVICE]

SEVERITY: ERROR
DESCRIPTION: DSS The policy identified by %s has an invalid user-defined entry criteria service %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_BAD_ENTRY_TYPE]

SEVERITY: ERROR
DESCRIPTION: DSDS The policy identified by %s has an invalid entry criteria %s:%s specified for state %s.
CAUSE: The object type is not DM_EXPRESSION.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_AS_REF_INSTALLED_BP]

SEVERITY: ERROR
DESCRIPTION: SI The alias set %s is referenced by %d installed Business Policy objects.
CAUSE: An alias set object is not changeable if it is referenced by installed Business Policy objects.
ACTION: Uninstall those Business Policy objects.
PARAMS:

ERROR: [DM_POLICY_E_EXIST_NO_BP_LOG]

SEVERITY: ERROR
DESCRIPTION: S BP Log (%s) was not created.
CAUSE: Its either script error or system error that causes this problem.
ACTION: Make sure that the hard disk is not full. Also look into server log for error messages that result from scripting error.
PARAMS:

ERROR: [DM_POLICY_E_BAD_ACTION_TYPE]

SEVERITY: ERROR
DESCRIPTION: DSDS The policy identified by %s has an invalid action object %s:%s specified for state %s.
CAUSE: The object type is not DM_PROCEDURE.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_NO_POLICY_METHOD]

SEVERITY: ERROR
DESCRIPTION: S Cannot find the method %s, which is needed to evaluate an entry criteria and/or to execute an action of a business policy.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_AS_ILLEGAL_NAME]

SEVERITY: ERROR
DESCRIPTION: S The alias set contains illegal symbols in the name (%s).
CAUSE: You have provided an alias set with illegal symbols like . in the name.
ACTION: Remove the illegal symbols.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_EXCP_TYPE]

SEVERITY: ERROR
DESCRIPTION: SSD The exception state %s of %s for dm_policy %s is a normal state.
CAUSE: The exception state defined is identified as a normal state in its state_class.
ACTION: Change the state_class value of the exception state to 1.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_0010]

SEVERITY: ERROR
DESCRIPTION: S BP transition script error. Details:%s
CAUSE: There exists some error in the BP transition script.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_LABEL]

SEVERITY: ERROR
DESCRIPTION: DS There is no policy object with chronincle ID %s and version label %s.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERENTRY_TYPE]

SEVERITY: ERROR
DESCRIPTION: DSDS The policy identified by %s has an invalid user-defined entry criteria %s:%s specified for state %s.
CAUSE: The object is of wrong type.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_NON_ATTACH_STATE]

SEVERITY: ERROR
DESCRIPTION: SD The state %s you tried to attach is not an attachable state of policy %s. CASUE: The is_attachable attribute is not set to T for this policy state.
CAUSE:
ACTION: Try to attach to other states.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1000]

SEVERITY: ERROR
DESCRIPTION: SS Unable to load the procedure:%s. Details:%s
CAUSE: The Internal Action Proc failed to load the specified procedure.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_STATE_INDEX]

SEVERITY: ERROR
DESCRIPTION: SD Invalid state index %s of policy %s specified.
CAUSE: You tried to use an invalid state index.
ACTION: Retry with a valid state index.
PARAMS:

ERROR: [DM_POLICY_E_AS_NAME_NOT_UNIQUE]

SEVERITY: ERROR
DESCRIPTION: S Cannot create the %s alias set since it already exists.
CAUSE: Tried to create an alias set that already exists. All alias set names are unique.
ACTION: Try again with a different alias set name.
PARAMS:

ERROR: [DM_POLICY_E_AS_NO_ALIAS_SET_POLICY]

SEVERITY: ERROR
DESCRIPTION: SSD No default alias set found for user %s under policy %s (ID = %s).
CAUSE: Tried to find a default alias set for a user under a specified policy.
ACTION: Make sure a default alias set is specified in one of the following: (1) sessionconfig, (2) the session users dm_user object, (3) dm_server_config, and (4) the specified policy object.
PARAMS:

ERROR: [DM_POLICY_E_NOT_INCLUDED_TYPE]

SEVERITY: ERROR
DESCRIPTION: DS dm_policy object identified by %s does not have %s as one of its valid attachable type.
CAUSE: included_type[] does not contain the object type which has tried to attach to this policy.
ACTION: the policy designer must add the type to included_type[], and try again
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1003]

SEVERITY: ERROR
DESCRIPTION: SSS Unable to remove value:%s from attribute:%s. Details:%s
CAUSE: The Internal Action Proc failed to remove value from attribute.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_2100]

SEVERITY: ERROR
DESCRIPTION: S Validation procedure detected error in the lifecycle. Details: %s
CAUSE: The dm_bp_validation method detected error.
ACTION: Check the details in the error message.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_2000]

SEVERITY: ERROR
DESCRIPTION: S Unable to set application_code to dm_all_applications. Details: %s
CAUSE: The business policy method was unable to set the application_code to dm_all_applications
ACTION: Check the details in the error message.
PARAMS:

ERROR: [DM_POLICY_E_UNIQUE_STATE_NAME]

SEVERITY: ERROR
DESCRIPTION: SD The state name %s within dm_policy %s must be unique.
CAUSE: the state name is not unique within a dm_policy.
ACTION: rename the duplicate one.
PARAMS:

ERROR: [DM_POLICY_E_OPER_FROM_EXCEPTION]

SEVERITY: ERROR
DESCRIPTION: SSD It is not allowed to %s on the document %s(%s) from the exception state.
CAUSE: The object is in an exception state. It is not allowed to promote or demote from this state.
ACTION: Perform resume operation on the object to bring it back to a normal state.
PARAMS:

ERROR: [DM_POLICY_E_AS_NO_ALIAS_SET]

SEVERITY: ERROR
DESCRIPTION: SS No value is found in alias set (%s) for resolving alias %s.
CAUSE: Tried to resolve an alias which does not exist in the specified alias set.
ACTION: Try to define at least one alias set which consists of the aliase in question in dm_alias_set and set up the session alias set, user alias set, system alias set appropriately.
PARAMS:

ERROR: [DM_POLICY_E_AS_PRIVILEGES]

SEVERITY: ERROR
DESCRIPTION: SS The current user (%s) has insufficient privileges to save or destroy the %s alias set object.
CAUSE: A user with insufficient privileges tried to save or destroy an alias set object.
ACTION: You must have create group, sysadmin, or superuser privilege to create an alias set. You must be the creator of the alias set, or have superuser privilege to modify or destroy the alias set. See your system administrator if you think you should have create group privilege.
PARAMS:

ERROR: [DM_POLICY_E_AS_NAME_VALUE_NOT_MATCHED]

SEVERITY: ERROR
DESCRIPTION: IIS The alias_name count (%d) and alias_value count (%d) of alias set %s are not matched.
CAUSE: The alias set object has a mis-matched alias name and alias value.
ACTION: Make sure the numbers of alias_name and alias_value are equivalent.
PARAMS:

ERROR: [DM_POLICY_E_INVALID_ARG]

SEVERITY: ERROR
DESCRIPTION: SSS The method %s has invalid value (%s) for argument %s.
CAUSE: Argument has invalid value.
ACTION: Make sure that all required arguments are correctly specified.
PARAMS: S – name of the method. S – value of the arguemnt. S – name of the argument.

ERROR: [DM_POLICY_E_NOT_A_POLICY]

SEVERITY: ERROR
DESCRIPTION: D The policy identified by %s is not a dm_policy object.
CAUSE:
ACTION: NONE.
PARAMS:

ERROR: [DM_POLICY_E_READ_LOG_FAILURE]

SEVERITY: ERROR
DESCRIPTION: SS Error reading file (%s). Operating System error: (%s).
CAUSE: A failure occurred while reading content from an open content file. The operating system error should give a better indication of the actual problem.
ACTION: Check if the indicated file exists check permissions to open or create the file.
PARAMS:

ERROR: [DM_POLICY_E_BAD_RESULT_ERROR]

SEVERITY: ERROR
DESCRIPTION: DSSSSS Document %s has illegal error format ([ErrorCode]=%s,[Parameter]=%s,[Parameter]=%s,[Parameter]=%s,[ServerError]=%s.
CAUSE: Error reported by dm_bp_transition needs to follow the following format: [ErrorCode] [Parameter] [Parameter] [Parameter] [ServerError] The number of parameters may vary depending on the error code. The keywords within the square bracket are case-sensitive. The legal range of is between 1000 and 1015.
ACTION: Make sure the error follow the format.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1008]

SEVERITY: ERROR
DESCRIPTION: SS Unable to remove symbolic label:%s. Details:%s
CAUSE: The Internal Action Proc failed to remove symbolic label.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_AS_NO_ALIAS_SET_USER]

SEVERITY: ERROR
DESCRIPTION: S No default alias set found for user %s. The following alias sets were searched: sessionconfig, user, users default group, server config, and policy (if applicable)
CAUSE: Tried to find a default alias set for a user.
ACTION: Make sure a default alias set is specified in one of the following: (1) sessionconfig, (2) the session users dm_user object, (3) the session users default group, (4) dm_server_config. (5) the first alias set defined in the policy, if exists. Note that if policy is involved, then the alias set found between 1 and 4 must be in the policys alias_set_ids attribute as well.
PARAMS:

ERROR: [DM_POLICY_E_AS_INVALID_NAME]

SEVERITY: ERROR
DESCRIPTION: SS Cannot find %s alias set for %s.
CAUSE: Cannot find the alias set with the given name. This may happen when fetching an alias set group by name during save, or destroy.
ACTION: Try again with the correct name.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1400]

SEVERITY: ERROR
DESCRIPTION: S The BP transition script failed due to deadlock. Details:%s
CAUSE: The BP transition script failed due to deadlock described in Details.
ACTION: Retry the action.
PARAMS:

ERROR: [DM_POLICY_E_AS_ILLEGAL_CATEGORY]

SEVERITY: ERROR
DESCRIPTION: I The alias set contains an illegal alias_category (%d).
CAUSE: You have provided an illegal alias_category. The following are legal categories: 0 (Unknown) 1 (User) 2 (Group) 3 (User or Group) 4 (Cabinet Path) 5 (Folder Path) 6 (ACL)
ACTION: Provide a legal category.
PARAMS:

ERROR: [DM_POLICY_E_BAD_USERVALIDATIONSERVICE]

SEVERITY: ERROR
DESCRIPTION: DS The policy identified by %s has an invalid user-defined validation service %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1004]

SEVERITY: ERROR
DESCRIPTION: SS Unable to remove all values from attribute:%s. Details:%s
CAUSE: The Internal Action Proc failed to remove all values from attribute.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1900]

SEVERITY: ERROR
DESCRIPTION: S Batch Promote failed. Details:%s
CAUSE: The Batch Promote method failed when it tries to gather bp information, i.e getting procedure ids.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_AS_NO_DEFAULT_ALIAS_SET]

SEVERITY: ERROR
DESCRIPTION: S No default alias set is allowed for resolving alias %s since the sysobject is attached to a policy without alias set.
CAUSE: Tried to resolve an alias on a sysobject attached to a policy without alias set.
ACTION: Try to provide an alias set in the alias or re-attach the sysobject to a policy with alias set.
PARAMS:

ERROR: [DM_POLICY_E_CONNECTION_ERROR]

SEVERITY: ERROR
DESCRIPTION: S Error connecting to docbase as user %s.
CAUSE: Invalid user name is used to connect to the docbase.
ACTION: Make sure that the user is a valid documentum user.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1006]

SEVERITY: ERROR
DESCRIPTION: SSS Unable to append value:%s to attribute:%s. Details:%s
CAUSE: The Internal Action Proc failed to append value to attribute.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1500]

SEVERITY: ERROR
DESCRIPTION: S The User Entry Criteria Proc failed. Details:%s
CAUSE: The User Entry Criteria Proc failed due to the error described in Details.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_E_BAD_ENTRY]

SEVERITY: ERROR
DESCRIPTION: DDS The policy identified by %s has an invalid entry criteria id %s specified for state %s.
CAUSE: The object does not exist.
ACTION:
PARAMS:

ERROR: [DM_POLICY_E_ERROR_1014]

SEVERITY: ERROR
DESCRIPTION: SS Unable to set %s as the owner of the object. Details:%s
CAUSE: The Internal Action Proc failed to set owner of an object.
ACTION: Check the details.
PARAMS:

ERROR: [DM_POLICY_I_ALREADY_IN_NORMAL]

SEVERITY: INFO
DESCRIPTION: S No need to resume the object since its current state %s is a normal state.
CAUSE:
ACTION: NONE.
PARAMS:

ERROR: [DM_POLICY_I_ALREADY_VALIDATED]

SEVERITY: INFO
DESCRIPTION: D The policy identified by %s is already in VALIDATED state.
CAUSE: This policy has not been modified since last validation.
ACTION: No need to validate this policy again until being modified.
PARAMS:

ERROR: [DM_POLICY_I_ALREADY_IN_EXCEP]

SEVERITY: INFO
DESCRIPTION: S No need to suspend the object since its current state %s is an exception state.
CAUSE:
ACTION: NONE.
PARAMS:

ERROR: [DM_POLICY_I_ALREADY_INSTALLED]

SEVERITY: INFO
DESCRIPTION: D The policy identified by %s has already been installed. No need to install again.
CAUSE:
ACTION: NONE.
PARAMS:

ERROR: [DM_POLICY_I_ALREADY_UNINSTALLED]

SEVERITY: INFO
DESCRIPTION: D The policy identified by %s is not installed. No need to uninstall again.
CAUSE:
ACTION: NONE.
PARAMS:

ERROR: [DM_POLICY_I_VALIDATE_INSTALLED]

SEVERITY: INFO
DESCRIPTION: D The policy identified by %s is in INSTALLED state. No need to validate it.
CAUSE: The policy has been validated and installed.
ACTION: There is no need to validate an INSTALLED policy.
PARAMS:

ERROR: [DM_POLICY_W_ACTION]

SEVERITY: WARNING
DESCRIPTION: null.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_W_CAUSE]

SEVERITY: WARNING
DESCRIPTION: unknown.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_W_WARN1]

SEVERITY: WARNING
DESCRIPTION: II This is a warning %d, %d.
CAUSE:
ACTION:
PARAMS:

ERROR: [DM_POLICY_W_REMOVE_REF]

SEVERITY: WARNING
DESCRIPTION: SD State-related changes have applied to %s (ID = %s) when there exist referencing sysobjects.
CAUSE: Some state-related changes have applied to a policy object when it has some referencing sysobjects.
ACTION: Check all the referencing sysobjects to see if they need to be re-attached.
PARAMS:

ERROR: [DM_POLICY_W_EMPTY_RESULT_CONTENT]

SEVERITY: WARNING
DESCRIPTION: DS The dm_bp_transition returns an empty document (%s) with status %s.
CAUSE: Internal error. However, the method seems to be launched O.K.
ACTION:
PARAMS:

ERROR: [DM_POLICY_W_ERROR_1700]

SEVERITY: WARNING
DESCRIPTION: S The User Post Processing Proc failed. Details:%s
CAUSE: The User Post Processing Proc failed due to the error described in Details.
ACTION: Check the details.
PARAMS:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: