7.0-dm_event

DM_EVENT


ERROR: [DM_EVENT_F_INIT9]

SEVERITY: FATAL
DESCRIPTION: SS Error renaming the table %s to %s
CAUSE: DB Error.
ACTION: check the RDBMS.
PARAMS:

ERROR: [DM_EVENT_F_INIT3]

SEVERITY: FATAL
DESCRIPTION: The type manager returned an error storing the dmEvent type.
CAUSE: Unknown.
ACTION: Look at the error logged by the type manager. Report this message and any parameters to your Documentum site representative.
PARAMS:

ERROR: [DM_EVENT_F_INIT6]

SEVERITY: FATAL
DESCRIPTION: Could not access the registry data
CAUSE: DB Error
ACTION: Check the RDBMS
PARAMS:

ERROR: [DM_EVENT_F_INIT4]

SEVERITY: FATAL
DESCRIPTION: Could not remove the registry type
CAUSE: Unknown.
ACTION: Look at the error logged by the type manager. Report this message and any parameters to your Documentum site representative.
PARAMS:

ERROR: [DM_EVENT_F_INIT1]

SEVERITY: FATAL
DESCRIPTION: The dmEvent type was found in the database without a version stamp.
CAUSE: Unknown.
ACTION: Report this message and any parameters to your Documentum site representative.
PARAMS:

ERROR: [DM_EVENT_F_INIT2]

SEVERITY: FATAL
DESCRIPTION: II Version stamp %d was expected to be %d.
CAUSE: The version stamp that the dmEvent object software expected was different from the actual version stamp in the database.
ACTION: You must upgrade your DocuServer database to conform to the software that you are running. If your software and data are consistent, then report a bug.
PARAMS:

ERROR: [DM_EVENT_F_INIT8]

SEVERITY: FATAL
DESCRIPTION: Error creating the temporary registry table
CAUSE: DB Error.
ACTION: check the RDBMS.
PARAMS:

ERROR: [DM_EVENT_F_INIT5]

SEVERITY: FATAL
DESCRIPTION: Could not create the new registry type
CAUSE: Unknown.
ACTION: Look at the error logged by the type manager. Report this message and any parameters to your Documentum site representative.
PARAMS:

ERROR: [DM_EVENT_F_INIT7]

SEVERITY: FATAL
DESCRIPTION: Could not save the new registry entry
CAUSE: Unknown.
ACTION: check the RDBMS.
PARAMS:

ERROR: [DM_EVENT_E_MAIL_LAUNCH]

SEVERITY: ERROR
DESCRIPTION: S Please contact your system administrator. Unable to send mail during processing of your event. The dm_method named %s could not be launched.
CAUSE: The dm_method object encountered errors trying to launch the verb.
ACTION: Check the server log and server configuration.
PARAMS:

ERROR: [DM_EVENT_E_DIRECTORY_ACCESS_S]

SEVERITY: ERROR
DESCRIPTION: SSS Error accessing your event directory. The dm_location object named %s that defines your event directory (%s) is in error. Operating System error was: %s
CAUSE: Operating system returned a failed status when verifying the event directory
ACTION: Check for proper file system definition of your dm_location object
PARAMS:

ERROR: [DM_EVENT_E_CURSOR_FAIL]

SEVERITY: ERROR
DESCRIPTION: SS The following query %s generated the following database %s error
CAUSE: Used for internal purpose.
ACTION: Report to your sys admin.
PARAMS:

ERROR: [DM_EVENT_E_FLUSH_REGISTRY_CACHE_BAD_KEY]

SEVERITY: ERROR
DESCRIPTION: S A cache key (%s) was supplied to the flush registrycache API call that is not a legal type name.
CAUSE: The cache key you specified is not a legal type name.
ACTION: Supply a key that is the name of an object type.
PARAMS:

ERROR: [DM_EVENT_E_DBERROR]

SEVERITY: ERROR
DESCRIPTION: SSSS Event manager was unable to perform %s on %s for event %s.\nDatabase error:\n%s
CAUSE: Event manager was attempting a database operation which failed.
ACTION: Ensure that all is well with the underlying database tables. Check the dmi_registry_s table.
PARAMS:

ERROR: [DM_EVENT_E_INVALID_ID]

SEVERITY: ERROR
DESCRIPTION: DS Invalid handle (%s) for system event %s.
CAUSE: An invalid event name is specified.
ACTION: Retry the operation with valid event name.
PARAMS:

ERROR: [DM_EVENT_E_CANT_REGISTER_TYPE_EVENT]

SEVERITY: ERROR
DESCRIPTION: SS It is not permitted to register for event %s on type %s.
CAUSE: Only certain types and events can be registered. See the documentation
ACTION: Consult your system administrator.
PARAMS:

ERROR: [DM_EVENT_E_NEED_SU_OR_SYS_TO_UNREG]

SEVERITY: ERROR
DESCRIPTION: SS The current user (%s) needs to have superuser or sysadmin privilege to unregister %s user event.
CAUSE: Must have Superuser or SysAdmin privilege to perform this operation.
ACTION: Consult your system administrator.
PARAMS:

ERROR: [DM_EVENT_E_CANT_REGISTER_UNLESS_MATERIALIZED]

SEVERITY: ERROR
DESCRIPTION: SS Could not register the specified %s event for %s because it is an un-materialized lightweight object.
CAUSE: It is not allowed to register a lightweight object for event notification before it is materialized
ACTION: Materialize the lightweight object and try again.
PARAMS:

ERROR: [DM_EVENT_E_NOT_REGISTERED]

SEVERITY: ERROR
DESCRIPTION: SSS User %s has not registered event %s for sysobject named %s.
CAUSE: Specified event is not registered for this user.
ACTION: Check to see if either the event or the sysobj ID is invalid.
PARAMS:

ERROR: [DM_EVENT_E_SEND_LAUNCH]

SEVERITY: ERROR
DESCRIPTION: S Please contact your system administrator. Unable to send mail during processing of your event. The dm_method named %s could not be launched.
CAUSE: The dm_method object encountered errors trying to launch the verb.
ACTION: Check the server log and server configuration.
PARAMS:

ERROR: [DM_EVENT_E_EVENT_ALREADY_REGISTERED]

SEVERITY: ERROR
DESCRIPTION: SSS Event %s on object %s is already registered for user %s.
CAUSE: The object already has the requested event registered
ACTION: No need to register for the same event twice
PARAMS:

ERROR: [DM_EVENT_E_CANT_REGISTER]

SEVERITY: ERROR
DESCRIPTION: SS Could not register the specified %s event for %s document/object.
CAUSE: The specified event could not be registered. Most likely bad event name specified.
ACTION: Check the event name and try again.
PARAMS:

ERROR: [DM_EVENT_E_MAIL_RUN]

SEVERITY: ERROR
DESCRIPTION: SSS Please contact your system administrator. Unable to send mail during processing of your event. The dm_method named %s reported a non-zero status from the program: (%s) with arguments: (%s).
CAUSE: The dm_method object encountered errors trying to launch the verb.
ACTION: Check the server log and server configuration.
PARAMS:

ERROR: [DM_EVENT_E_DIRECTORY_ACCESS_M]

SEVERITY: ERROR
DESCRIPTION: SSSS Error accessing your event directory. The dm_location object named %s and/or the dm_mount_point object named %s that defines your event directory (%s) is in error. Operating System error was: %s
CAUSE: Operating system returned a failed status when verifying the event directory.
ACTION: Ensure that your NFS enabled capability is defined correctly. If your client does not have NFS access to the server disk defined by the mount point, you must have NFS enabled set to FALSE. Check for NFS enabled in your session config object, server config, and dmcl.ini file. If you do have NFS access, Check for proper file system definition in your dm_location object. If the location is defined correctly, check that the mount point is mounted on your client machine.
PARAMS:

ERROR: [DM_EVENT_E_CANT_UNREGISTER]

SEVERITY: ERROR
DESCRIPTION: SSS User %s could not unregister the specified %s event for %s document/object.
CAUSE: The specified event could not be unregistered. Most likely bad event name specified.
ACTION: Check the event name and try again. Could be that the specific user has not registered for this event.
PARAMS:

ERROR: [DM_EVENT_E_CANT_NOTIFY]

SEVERITY: ERROR
DESCRIPTION: SS Could not send notification for event %s for %s document/object.
CAUSE: The specified event could not be notified. Most likely bad event name specified or failed database operation.
ACTION: Check the event name and try again.
PARAMS:

ERROR: [DM_EVENT_E_NEED_SYS_TO_REG_TYPE]

SEVERITY: ERROR
DESCRIPTION: SSS The current user (%s) needs to have superuser or sysadmin privilege to register event %s on type %s.
CAUSE: Must have Superuser or SysAdmin privilege to perform this operation.
ACTION: Consult your system administrator.
PARAMS:

ERROR: [DM_EVENT_E_INVALID_EVENT]

SEVERITY: ERROR
DESCRIPTION: S Invalid system event %s.
CAUSE: An invalid event name is specified.
ACTION: Retry the operation with valid event name.
PARAMS:

ERROR: [DM_EVENT_E_CANT_FIND_OBJ]

SEVERITY: ERROR
DESCRIPTION: SS Could not find the object, name or event %s for id %s
CAUSE: The object identified by the id could not be found for that event.
ACTION: Check the id to make sure that it is a valid sysobject.
PARAMS:

ERROR: [DM_EVENT_E_SEND_RUN]

SEVERITY: ERROR
DESCRIPTION: SSS Please contact your system administrator. Unable to send mail during processing of your event. The dm_method named %s reported a non-zero status from the program: (%s) with arguments: (%s).
CAUSE: The dm_method object encountered errors trying to launch the verb.
ACTION: Check the server log and server configuration.
PARAMS:

ERROR: [DM_EVENT_W_LENGTH_WIDEN_FAILED]

SEVERITY: WARNING
DESCRIPTION: SII The upgrade failed on widening registrys attribute (%s) length from %d to %d.
CAUSE: The database server may have problems widening the column length (e.g., the column is indexed), or the attribute length may already be widen.
ACTION: Check database server log or use sql script(under dba) to upgrade. If the column is indexed, then drop the index, restart server and re-index the column.
PARAMS:

ERROR: [DM_EVENT_W_MAIL_METHOD]

SEVERITY: WARNING
DESCRIPTION: S The method %s specified in the mail_method attribute of the server config object is not a valid method. The server will use the dm_event_sender method to send mail.
CAUSE: The mail_method attribute of the server config object is set to an invalid method.
ACTION: Set the mail_method attribute as appropriate.
PARAMS:

ERROR: [DM_EVENT_W_SEND_MSG_TURNCATED]

SEVERITY: WARNING
DESCRIPTION: I Message is too long and so turncated after %d characters before sending it out.
CAUSE: Message is too long.
ACTION: Message is turncated.
PARAMS:

ERROR: [DM_EVENT_W_INIT10]

SEVERITY: WARNING
DESCRIPTION: S Error dropping the table %s
CAUSE: DB Error.
ACTION: manually remove table.
PARAMS:

ERROR: [DM_EVENT_W_SEND_LAUNCH]

SEVERITY: WARNING
DESCRIPTION: S Please contact your system administrator. Unable to send mail during processing of your event. The dm_method named %s could not be launched.
CAUSE: The dm_method object encountered errors trying to launch the verb.
ACTION: Check the server log and server configuration.
PARAMS:

ERROR: [DM_EVENT_W_SEND_RUN]

SEVERITY: WARNING
DESCRIPTION: SSS Please contact your system administrator. Unable to send mail during processing of your event. The dm_method named %s reported a non-zero status from the program: (%s) with arguments: (%s).
CAUSE: The dm_method object encountered errors trying to launch the verb.
ACTION: Check the server log and server configuration.
PARAMS:

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: